Are you prepared for the environmentally friendly transition to low-GWP (global warming potential) gases? Read this article for 5 steps you could take to prepare for the transition to sustainable low-GWP refrigerants in your products.
Low-GWP refrigerants are increasingly replacing high-GWP refrigerants – and this is a good thing looking at it from an environmental perspective. But there is a downside because, contrary to high-GWP refrigerants, low-GWP refrigerants are often flammable. This means that manufacturers transitioning to low-GWP are facing new requirements for safety testing to ensure consumers can safely use the product. This article outlines 5 steps you should consider.
The international standard IEC 60335 covers the requirements for electrical and electronic household appliances. In the standard’s part 1, the general requirements are covered, while the supplementary requirements for the specific types of devices are covered by part 2. More than 100 devices have been called out in part 2.
Below we have listed some of the most relevant part 2 standards that will affect companies transitioning to low-GWP refrigerants.
Products with multiple functions may be covered by two different part 2 standards – i.e., a washing machine (covered by IEC-60335-2-7) with clothes drying function (covered by IEC-60335-2-11). In such cases it will be necessary to test and approve according to both standards.
There may be regional and/or local variations to above mentioned international standards. It is therefore important to gain an overview any local or regional deviations to these standards in the specific markets you wish to sell your products on.
2. Evaluate the pros and cons of different types of low-GWP refrigerants
There are various types of low-GWP refrigerants to choose from. Part of your preparation should therefore include research on the pros and cons of the refrigerants, you are considering, so you can choose the one which is the best fit for your product and the criteria you have.
In below table, we have listed some of the refrigerants to choose from and some of their pros and cons:
|
Gas type |
Pros |
Cons |
|
R32 |
|
|
|
Hydrocarbons R290 (Propane), R600 (Butane) R600a (Isobutane) |
|
|
|
R1234-yf (HFO-1234yf) |
|
|
|
R-717 |
|
|
Source: Low GWP gases – the pros and cons - Cooling Post
If you already have a product you wish to do a retrofit on or have a prototype, we suggest you do either a GAP analysis or a construction evaluation.
A GAP analysis entails performing an analysis of the gaps between your existing product and your new product. The GAP analysis will outline any gaps between your design and relevant standard(s).
In a constructional evaluation, we perform a detailed evaluation of your product construction design to clarify any challenges that need measuring.
Both tests will help you gain a good overview and understanding of any discrepancies between your current product, and the standard's requirements. This knowledge can help you decide on any relevant design adjustments at an early stage hereby saving both time and money.
The purpose of the tests is to ensure that there are no leakages and, thus, no subsequent risk for explosion.
Read more: Testing of products with low-GWP refrigerants.
Navigate the certification and approval process and collect the required documentation to apply for the respective certifications. As this can be both complex and time-consuming, you can contact a company like Nemko to help you with this. Gain an overview of the different certificates and which ones Nemko might help you with.
How can Nemko help?
If you have any questions or concerns, Nemko is always here to help you. Reach out to your local Nemko office or use the contact us form on this website.